32-bit digital 4-in/8-out speaker management system
► 4 inputs and 8 outputs with free routing
► 8 equalizers per input channel (low-/high- shelf/parametric)
► 6 equalizers per output channel
► Symmetric inputs and outputs via XLR steel-connectors
► Analog and digital (AES/EBU©) inputs
► RS485 connectors at the rear-panel
► High performance 32-bit DSP (digtial sound processor)
► 96 kHz AD/DA converters (Burr Brown)
► PC print function „DATA VIEW“
► Dynamic range >114 dB
The DC8000 is a digital 4-in / 8-out speaker management matrix system with an internal resolution of 32 bit and 96 kHz sampling rate. The DC8000 is equipped with 4 analog and digital (AES/EBU© format) inputs, 8 analog outputs and two RS485 remote-connectors. The use of modern and fast DSPs enables a latency (analog to analog) of 0,625 ms only. Each input channel includes 8 equalizers (with low-shelf, high-shelf and parametric function), a delay function and a noise gate. The polarity of each input channel can be switched from + to -. Each output channel includes 6 equalizers (with low-shelf, high-shelf and parametric function) and a delay function. The HPF (high-pass filter) and the LPF (low-pass filter) is part of each output channel. Both offer three different operation modes: Linkwitz-Riley, Butterworth and Bessel (up to 48 dB/Oct). Each output channel includes a high performance limiter. The integrated flash memory chip offers space for 30 presets which can be loaded via the preset-menu, three default-buttons or the PC remote software.
Inputs
|
4 (analog & digital AES/EBU©)
|
Outputs
|
8 (analog)
|
Frequency crossovers
|
6 dB/Oct., 12 dB/Oct., 18 dB/Oct., 24 dB/Oct., 48 dB/Oct. (slope),
Linkwitz-Riley, Butterworth und Bessel
|
Filters
|
80 parametric EQs, 80 shelving EQs (high shelf or low shelf),
8 low cut filters, 8 high cut filters, 8 limiters / compressors with peak limiter
|
Delay
|
4 master delays (0 ms - 990 ms)
8 channel delays (0 ms - 990 ms)
|
Converting & processing
|
Burr Brown© AD/DA converters, 96 kHz sampling rate (internal),
32-Bit processor (DSP), 128-times over sampling,
|
Input connectors
|
4 x Neutrik© XLR female, electronically balanced
|
Input voltage
|
1.55 V / + 6 dBu (nominal)
|
Max. input voltage
|
24.5 V / + 30 dBu
|
Input impedance
|
20 kohms
|
Common mode rejection
|
> 70 dB / 1 kHz
|
Output connectors
|
8 x Neutrik© XLR male, electronically balanced
|
Output voltage
|
1.55 V / + 6 dBu (nominal)
|
Max. output voltage
|
8.7 V / + 21 dBu
|
Output impedance
|
> 100 ohms
|
Minimum load impedance
|
600 ohms
|
Frequency response
|
20 Hz - 20 kHz (-0.5 dB)
|
S/N ratio
|
114 dB (typical)
|
Distortion
|
< 0.01%
|
Display
|
4 x 20 character LCD display with LED background lighting
|
Mains voltage / power consumption
|
90 - 250 V (AC) @ 50 - 60 Hz / 20 W
|
Latency
|
0,625 ms
|
Maximum power consumption
|
20 W
|
Dimensions unit (mm) W x H x D
|
472 x 44 x 277, 19” format, 1 RU/RS (HE)
|
Weight (net / gross)
|
3.5 kg / 5 kg
|
Optional Accessories
|
URC2: Converter USB / RS485 (# 20065)
|